Navigation´╝ÜHome > Content >

[ea]DailyHiLoFIB_Ron_MT4_v01a.mq4

Time: 2014-09-03 | Download file:[ea]DailyHiLoFIB_Ron_MT4_v01a.mq4

//+---------------+
//|Daily HiLo FIB |
//+---------------+
#property copyright "Ron Thompson"
#property link      "http://www.ForexMT4.com/"

// This EA is NEVER to be SOLD individually 
// This EA is NEVER to be INCLUDED as part of a collection that is SOLD

/*

---Martingale---

   If enabled (MartingaleStyle greater than 1) the system will increase lot sizes when there is a loss.
   This is an attempt to recover the previous lossby doubling the current trade.

   The failure of Martingale will come when you don't have enough money to support the steps anymore, 
   and you lose everything, AND MORE, because FOREX trades on MARGIN!!!.


---MartingaleStyle---

   Allows you to pick the type of Martingale you are comfortible with.
   
   0 == NO LOSS RECOVERY
   1 == pure Martingale
   2 == Modified Martingale - starts after 2 losses
   3 == Fibonacci - growth by Fibo numbers, requires 2 wins to recover the total loss
   4 == Martingale partial, starts after 5 losses
   
   NOTE!  The largest lot is controlled by  MODE_MAXLOT and will NOT be exceeded

      
---Starting Balance---
   
   The formula for Lots is    AccountBalance() / StartingBalance

   Lets say your AccountBalance() is currently 550$
      
   if you want to trade 10.0  lots, put   55    into StartingBalance    550 /    55  = 10
   if you want to trade  1.0  lots, put   550   into StartingBalance    550 /   550  =  1
   if you want to trade  0.5  lots, put   1100  into StartingBalance    550 /  1100  =  0.5
   if you want to trade  0.1  lots, put   5500  into StartingBalance    550 /  5500  =  0.1
   if you want to trade  0.01 lots, put   55000 into StartingBalance    550 / 55000  =  0.01 
   
---ProfitMade---

   The amount of pips you expect to make on EACH TRADE
   

---LossLimit---

   The amount of pips you can afford to lose on EACH TRADE


---Basket---

   In DOLLARS, this will close all trades after so much profit or loss   


---BreakEven---

   Move the stoploss to break-even once the trade is in profit by 'breakeven' pips


---TrailStop---

   Follow price action with a stoploss, keeping the stoploss within 'TrailStop' pips
   

---Lot Increase---

   Lots must be equal to ZERO and StartingBalance>ZERO for lot increasement to work
   
   LotIncreasement grows the lot size based on your starting balance, risking more money
   when you have more money. It is built in, based on Starting Balance and LotResolution,
   and is independent of the Martingale process.


---LotResolution---

   This controls the Lot size of step your broker/account can support
   If set to 1, then your lot size is increased in 0.1 steps as your account grows
   If set to 2, then your lot size is increased in 0.01 steps as your account grows
   
   IBFX supports LotResolution of 2
   

---General---

Added Robert Hill's routine to manage 4 or 5 decimal place brokers
Updated the lotsi calculations to support martingale AND increasement



*/


// EA SPECIFIC
extern double ATRPeriod           =       0   ;
extern double ATRMultiplier       =       1.0 ;

// user input
extern int    MartingaleStyle     =       0   ;
extern double Lots                =       5   ;
extern double StartingBalance     =       0   ;    
extern double ProfitMade          =       0   ; 
extern double BasketProfit        =       0   ; 
extern double LossLimit           =      69   ;
extern double BasketLoss          =       0   ;
extern double BreakEven           =       0   ;
extern double TrailStop           =      34   ;
extern int    LotResolution       =       1   ;
extern bool   KillLogging         =    true   ;


// Trade control
double        Lotz;
double        lotsi;                                // used for Martingale loss recovery
double        myPoint;                              // support for 3/5 decimal places
int           Slippage=2;                           // how many pips of slippage can you tolorate
bool          TradeAllowed=true;                    // used to manage trades
int           loopcount;                            // count of order attempts
int           maxloop=25;                           // maximum number of attempts to handle errors
int           LL2SL=10;                             // LossLimit to StopLoss server spread
int           maxOrders;                            // statistic for maximum numbers or orders open at one time
double        maxLots;                              // Largest lot size ever opened
int           MagicNumber  = 252537;                // allows multiple experts to trade on same account
string        TradeComment = "_dhlF1a.txt";          // where to log information

// Bar handling
datetime      bartime=0;                            // used to determine when a bar has moved

// Loss Recovery
int           lotptr=0;                             // array pointer for Loss Recovery
int           maxptr=9;                             // maximum Loss Recovery array element
int           Step[10];                             // how to step the IStep pointer

int           dayShort=1;                           //1 short per day
int           dayLong=1;                            //1 long per day 

// used for verbose error logging
#include 


//+-------------+
//| Custom init |
//|-------------+
// Called ONCE when EA is added to chart or recompiled

int init()
  {
   // get normalized Point based on Broker decimal places
   myPoint = SetPoint();
   
   // start with the right sized lots
   //lotsi=Lots;
   // grow Lots if using StartingBalance
   Lotz=Lots;
   if(StartingBalance>0 && Lots==0)
     {
      Lotz=NormalizeDouble(AccountBalance()/StartingBalance,LotResolution);
     }
   lotsi=Lotz;
   

   // NO LOSS RECOVERY
   if (MartingaleStyle==0)
     {
      logwrite(TradeComment,"Loss Recovery Style = 0 - NONE");
      Step[0]=1;
      Step[1]=1;
      Step[2]=1;
      Step[3]=1;
      Step[4]=1;
      Step[5]=1;
      Step[6]=1;
      Step[7]=1;
      Step[8]=1;
      Step[9]=1;
     }

   // Martingale 
   if (MartingaleStyle==1)
     {
      logwrite(TradeComment,"Loss Recovery Style = 1 - MART");
      Step[0]=1;
      Step[1]=2;
      Step[2]=4;
      Step[3]=8;
      Step[4]=16;
      Step[5]=32;
      Step[6]=64;
      Step[7]=128;
      Step[8]=256;
      Step[9]=512;
     }

   // Martingale off by 1
   if (MartingaleStyle==2)
     {
      logwrite(TradeComment,"Loss Recovery Style = 1 - MART-MOD");
      Step[0]=1;
      Step[1]=1;
      Step[2]=2;
      Step[3]=4;
      Step[4]=8;
      Step[5]=16;
      Step[6]=32;
      Step[7]=64;
      Step[8]=128;
      Step[9]=256;
     }

   // Fibonacci
   if (MartingaleStyle==3)
     {
      logwrite(TradeComment,"Loss Recovery Style = 3 - FIBO");
      Step[0]=1;
      Step[1]=1;
      Step[2]=2;
      Step[3]=3;
      Step[4]=5;
      Step[5]=8;
      Step[6]=13;
      Step[7]=21;
      Step[8]=34;
      Step[9]=55;
     }

   // Martingale Partial
   if (MartingaleStyle==4)
     {
      logwrite(TradeComment,"Loss Recovery Style = 4 - MART-PART");
      Step[0]=1;
      Step[1]=1;
      Step[2]=1;
      Step[3]=1;
      Step[4]=2;
      Step[5]=4;
      Step[6]=8;
      Step[7]=16;
      Step[8]=32;
      Step[9]=64;
     }


   if(IsTesting()) LL2SL=100;
   if(IsTesting()) maxloop=2 ;

   logwrite(TradeComment,"Init Complete");
   Comment(" ");



  }

//+----------------+
//| Custom DE-init |
//+----------------+
// Called ONCE when EA is removed from chart

int deinit()
  {
   // always indicate deinit statistics
   logwrite(TradeComment,"MAX number of orders "+maxOrders);
   logwrite(TradeComment,"Max Lots is "+maxLots);
   
   logwrite(TradeComment,"DE-Init Complete");
   Comment(" ");
  }


//+-----------+
//| Main      |
//+-----------+
// Called EACH TICK and each Bar[]

int start()
  {

   int      cnt=0;
   int      gle=0;
   int      ticket=0;
   int      OrdersPerSymbol=0;
   int      fib50;

   // stoploss and takeprofit and close control
   double SL=0;
   double TP=0;
   
   double CurrentProfit=0;
   double CurrentBasket=0;
     
   // direction control
   bool BUYme=false;
   bool SELLme=false;



   //safety counter
   int   loopcount=0;
      
   //Sunday bar 
   int      backbar;


   // bar counting
   if(bartime!=Time[0]) 
     {
      bartime=Time[0];
      dayLong=0;
      dayShort=0;
     }


   // grow Lots if using StartingBalance
   Lotz=Lots;
   if(StartingBalance>0 && Lots==0)
     {
      Lotz=NormalizeDouble(AccountBalance()/StartingBalance,LotResolution);
     }


   OrdersPerSymbol=0;
   for(cnt=OrdersTotal();cnt>=0;cnt--)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if( OrderSymbol()==Symbol() && OrderMagicNumber()==MagicNumber) OrdersPerSymbol++;
     }
   if(OrdersPerSymbol==0) TradeAllowed=true;
   // keep some statistics
   if(OrdersPerSymbol>maxOrders) maxOrders=OrdersPerSymbol;



   //uncomment for MULTIPLE trades per bar 
   if(OrdersPerSymbol==0) TradeAllowed=true;

     
   //+-----------------------------+
   //| Insert your indicator here  |
   //| And set either BUYme or     |
   //| SELLme true to place orders |
   //+-----------------------------+

   if(DayOfWeek() == 0) backbar=2; else backbar=1;
   fib50=High[backbar]-((High[backbar]-Low[backbar])/2);
   if (Close[0]>fib50) BUYme=true;
   if (Close[0]=0;cnt--)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if( OrderSymbol()==Symbol() && OrderMagicNumber()==MagicNumber)
        {
         // add up pips
         //if(OrderType()==OP_BUY  ) CurrentBasket=CurrentBasket+(  Close[0]-OrderOpenPrice()         );
         //if(OrderType()==OP_SELL ) CurrentBasket=CurrentBasket+( (Close[0]-OrderOpenPrice()) * (-1) );
         //add up dollars
         if(OrderType()==OP_BUY  ) CurrentBasket=CurrentBasket+(  OrderProfit() );
         if(OrderType()==OP_SELL ) CurrentBasket=CurrentBasket+(  OrderProfit() );
        }
     }

   if( BasketProfit>0 && CurrentBasket>=BasketProfit    ) CloseEverything();
   if( BasketLoss  >0 && CurrentBasket<=BasketLoss*(-1) ) CloseEverything();


   for(cnt=OrdersTotal();cnt>=0;cnt--)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if( OrderSymbol()==Symbol() && OrderMagicNumber()==MagicNumber )
        {
        
         if(OrderType()==OP_BUY)
           {
            CurrentProfit=(Bid-OrderOpenPrice()) ;

            //
            // Modify for break even
            //=======================
            //
            // OrderStopLoss will be equal to OrderOpenPrice if this event happens
            // thus it will only ever get executed one time per ticket
            if( BreakEven>0 )
              {
               if (CurrentProfit >= BreakEven*myPoint && OrderOpenPrice()>OrderStopLoss())
                 {
                  SL=OrderOpenPrice()+(Ask-Bid);
                  TP=OrderTakeProfit();
                  OrderModify(OrderTicket(),OrderOpenPrice(),SL,TP, White);
                  gle=GetLastError();
                  if(gle==0)
                    {
                     logwrite(TradeComment,"MODIFY BUY BE Ticket="+OrderTicket()+" SL="+SL+" TP="+TP);
                    }
                     else 
                    {
                     logwrite(TradeComment,"-----ERROR----- MODIFY BUY  BE Bid="+Bid+" error="+gle+" "+ErrorDescription(gle));
                    }
                 }
              }


            //
            // check for trailing stop
            //=========================
            //
            // This starts trailing after 'TrailStop' pips of profit
            if( TrailStop>0 && Close[0]>OrderOpenPrice()+(TrailStop*myPoint) )  
              {                 
               if( OrderStopLoss() < Bid-(TrailStop*myPoint) )
                 {
                  SL=Bid-(TrailStop*myPoint);
                  TP=OrderTakeProfit();
                  OrderModify(OrderTicket(),OrderOpenPrice(),SL,TP,0,White);
                  gle=GetLastError();
                  if(gle==0)
                    {
                     logwrite(TradeComment,"MODIFY BUY TS Ticket="+OrderTicket()+" SL="+SL+" TP="+TP);
                     lotsi=Lotz;
                     lotptr=0;
                    }
                     else 
                    {
                     logwrite(TradeComment,"-----ERROR----- MODIFY BUY TS Bid="+Bid+" error="+gle+" "+ErrorDescription(gle)+" ");
                    }
                 }
              }


            // Did we make a profit
            //======================
            if(ProfitMade>0 && CurrentProfit>=(ProfitMade*myPoint))
              {
               CloseBuy("PROFIT");
               // PROFIT, so reset the lot size per user inputs
               lotsi=Lotz;
               lotptr=0;
              }
              

            // Did we take a loss
            //====================
            if(LossLimit>0 && CurrentProfit<=(LossLimit*(-1)*myPoint))
              {
               CloseBuy("LOSS");
               lotptr++;
               if(lotptr>maxptr) lotptr=0;
               if(MartingaleStyle>0)
                 {
                  lotsi=NormalizeDouble(Lotz*Step[lotptr],LotResolution);
                  logwrite(TradeComment,"BUY lotptr="+lotptr+"  Step="+Step[lotptr]);
                 }
              }
              
           } // if BUY


         if(OrderType()==OP_SELL)
           {
            CurrentProfit=(OrderOpenPrice()-Ask);
            //logwrite(TradeComment,"SELL CurrentProfit="+CurrentProfit/myPoint+" CurrentBasket="+CurrentBasket/myPoint);

           
            //
            // Modify for break even
            //=======================
            //
            // OrderStopLoss will be equal to OrderOpenPrice if this event happens
            // thus it will only ever get executed one time per ticket
            if( BreakEven>0 )
              {
               if (CurrentProfit >= BreakEven*myPoint && OrderOpenPrice()0 && Close[0] Ask+(TrailStop*myPoint) )
                 {
                  SL=Ask+(TrailStop*myPoint);
                  TP=OrderTakeProfit();
                  OrderModify(OrderTicket(),OrderOpenPrice(),SL,TP,0,Red);
                  gle=GetLastError();
                  if(gle==0)
                    {
                     logwrite(TradeComment,"MODIFY SELL TS Ticket="+OrderTicket()+" SL="+SL+" TP="+TP);
                     lotsi=Lotz;
                     lotptr=0;
                    }
                     else 
                    {
                     logwrite(TradeComment,"-----ERROR----- MODIFY SELL TS Ask="+Ask+" error="+gle+" "+ErrorDescription(gle));
                    }

                 }

              }


            // Did we make a profit
            //======================
            if( ProfitMade>0 && CurrentProfit>=(ProfitMade*myPoint) )
              {
               CloseSell("PROFIT");
               // PROFIT, so reset the lot size per user inputs
               lotsi=Lotz;
               lotptr=0;
              }
             

            // Did we take a loss
            //====================
            if( LossLimit>0 && CurrentProfit<=(LossLimit*(-1)*myPoint) )
              {
               CloseSell("LOSS");
               lotptr++;
               if(lotptr>maxptr) lotptr=0;
               if(MartingaleStyle>0)
                 {
                  lotsi=NormalizeDouble(Lotz*Step[lotptr],LotResolution);
                  logwrite(TradeComment,"SELL lotptr="+lotptr+"  Step="+Step[lotptr]);
                 }

              }

           } //if SELL
           
        } // if(OrderSymbol)
        
     } // for

  } // start()


//+-----------------+
//| CloseEverything |
//+-----------------+
// Closes all OPEN and PENDING orders

int CloseEverything()
  {
   int i;
    
   for(i=OrdersTotal();i>=0;i--)
     {

      OrderSelect(i, SELECT_BY_POS);
      if(OrderSymbol()==Symbol() && OrderMagicNumber()==MagicNumber)
        {
         if(OrderType()==OP_BUY)       CloseBuy ("BASKET");
         if(OrderType()==OP_SELL)      CloseSell("BASKET");
         if(OrderType()==OP_BUYLIMIT)  OrderDelete( OrderTicket() );
         if(OrderType()==OP_SELLLIMIT) OrderDelete( OrderTicket() );
         if(OrderType()==OP_BUYSTOP)   OrderDelete( OrderTicket() );
         if(OrderType()==OP_SELLSTOP)  OrderDelete( OrderTicket() );
        }

      Sleep(1000);

     } //for
  
  } // closeeverything



// log data to a file name passed in
// print everything regardless of log setting
void logwrite (string filename, string mydata)
  {
   int myhandle;
   string gregorian=TimeToStr(CurTime(),TIME_DATE|TIME_SECONDS);

   Print(mydata+" "+gregorian);
   
   // don't log anything if testing or if user doesn't want it
   if(IsTesting()) return(0);
   if(KillLogging) return(0);

   myhandle=FileOpen(Symbol()+"_"+filename, FILE_CSV|FILE_WRITE|FILE_READ, ";");
   if(myhandle>0)
     {
      FileSeek(myhandle,0,SEEK_END);
      FileWrite(myhandle, mydata+" "+gregorian);
      FileClose(myhandle);
     }
  } 


//ENTRY LONG (buy, Ask) 
void OpenBuy()
     {
      int      gle=0;
      int      ticket=0;
      
      double SL=0;
      double TP=0;
      int loopcount;

      // PLACE order is independent of MODIFY order. 
      // This is mandatory for ECNs and acceptable for retail brokers

      loopcount=0;
      while(true)          
        {
         // place order - NO TP OR SL
         ticket=OrderSend(Symbol(),OP_BUY,lotsi,Ask,Slippage,0,0,TradeComment,MagicNumber,White);
         gle=GetLastError();
         if(gle==0)
           {
            logwrite(TradeComment,"BUY PLACED Ticket="+ticket+" Ask="+Ask+" Lots="+lotsi);
            TradeAllowed=false;
            break;
           }
          else 
           {
            logwrite(TradeComment,"-----ERROR-----  Placing BUY order: Lots="+lotsi+" Bid="+Bid+" Ask="+Ask+" ticket="+ticket+" Err="+gle+" "+ErrorDescription(gle)); 
            
            RefreshRates();
            Sleep(500);

            // give up after loopcount tries
            loopcount++;
            if(loopcount>maxloop)
              {
               logwrite(TradeComment,"-----ERROR-----  Giving up on placing BUY order"); 
               return(gle);
              }
           }
        }//while - place order 


      // modify the order for users TP & SL
      loopcount=0;
      while(true)
        {
         // don't set TP and SL both to zero, they're already there
         if(LossLimit==0 && ProfitMade==0) break;
         
         if(LossLimit  ==0) SL=0;
         if(ProfitMade ==0) TP=0;
         if(LossLimit   >0) SL=Ask-((LossLimit+LL2SL)*myPoint );
         if(ProfitMade  >0) TP=Ask+((ProfitMade+LL2SL)*myPoint );
         OrderModify(ticket,OrderOpenPrice(),SL,TP,0,White);
         gle=GetLastError();
         if(gle==0)
           {
            logwrite(TradeComment,"BUY MODIFIED Ticket="+ticket+" Ask="+Ask+" Lots="+lotsi+" SL="+SL+" TP="+TP);
            break;
           }
          else 
           {
            logwrite(TradeComment,"-----ERROR-----  Modifying BUY order: Lots="+lotsi+" SL="+SL+" TP="+TP+" Bid="+Bid+" Ask="+Ask+" ticket="+ticket+" Err="+gle+" "+ErrorDescription(gle)); 
            
            RefreshRates();
            Sleep(500);

            loopcount++;
            if(loopcount>maxloop)
              {
               logwrite(TradeComment,"-----ERROR-----  Giving up on modifying BUY order"); 
               return(gle);
              }
           }
        }//while - modify order
        
        
     }//BUYme



   //ENTRY SHORT (sell, Bid)
void OpenSell()
     {
      int      gle=0;
      int      ticket=0;
      
      double SL=0;
      double TP=0;
      int loopcount;

      // PLACE order is independent of MODIFY order. 
      // This is mandatory for ECNs and acceptable for retail brokers

      loopcount=0;
      while(true)
        {
         ticket=OrderSend(Symbol(),OP_SELL,lotsi,Bid,Slippage,0,0,TradeComment,MagicNumber,Red);
         gle=GetLastError();
         if(gle==0)
           {
            logwrite(TradeComment,"SELL PLACED Ticket="+ticket+" Bid="+Bid+" Lots="+lotsi);
            TradeAllowed=false;
            break;
           }
            else 
           {
            logwrite(TradeComment,"-----ERROR-----  placing SELL order: Lots="+lotsi+" SL="+SL+" TP="+TP+" Bid="+Bid+" Ask="+Ask+" ticket="+ticket+" Err="+gle+" "+ErrorDescription(gle)); 
                            
            RefreshRates();
            Sleep(500);

            loopcount++;
            if(loopcount>maxloop)
              {
               logwrite(TradeComment,"-----ERROR-----  Giving up on placing SELL order"); 
               return(gle);
              }
           }
        }//while

      
      // modify the order for users TP & SL
      loopcount=0;
      while(true)
        {
         // don't set TP and SL both to zero, they're already there
         if(LossLimit==0 && ProfitMade==0) break;
         
         if(LossLimit  ==0) SL=0;
         if(ProfitMade ==0) TP=0;
         if(LossLimit   >0) SL=Bid+((LossLimit+LL2SL)*myPoint );
         if(ProfitMade  >0) TP=Bid-((ProfitMade+LL2SL)*myPoint );
         OrderModify(ticket,OrderOpenPrice(),SL,TP,0,Red);
         gle=GetLastError();
         if(gle==0)
           {
            logwrite(TradeComment,"SELL MODIFIED Ticket="+ticket+" Bid="+Bid+" Lots="+lotsi+" SL="+SL+" TP="+TP);
            TradeAllowed=false;
            break;
           }
            else 
           {
            logwrite(TradeComment,"-----ERROR-----  modifying SELL order: Lots="+lotsi+" SL="+SL+" TP="+TP+" Bid="+Bid+" Ask="+Ask+" ticket="+ticket+" Err="+gle+" "+ErrorDescription(gle)); 
                            
            RefreshRates();
            Sleep(500);

            loopcount++;
            if(loopcount>maxloop)
              {
               logwrite(TradeComment,"-----ERROR-----  Giving up on placing SELL order"); 
               return(gle);
              }
           }

        }//while

     }//SELLme



void CloseBuy (string myInfo)
  {
   int gle;
   int cnt;
   int OrdersPerSymbol;

   int loopcount=0;
   
   string bTK=" Ticket="+OrderTicket();
   string bSL=" SL="+OrderStopLoss();
   string bTP=" TP="+OrderTakeProfit();
   string bPM;
   string bLL;
   string bER;

   bPM=" PM="+ProfitMade;
   bLL=" LL="+LossLimit;

   while(true)
     {
      OrderClose(OrderTicket(),OrderLots(),Bid,Slippage,White);
      gle=GetLastError();
      bER=" error="+gle+" "+ErrorDescription(gle);

      if(gle==0)
        {
         logwrite(TradeComment,"CLOSE BUY "+myInfo+ bTK + bSL + bTP + bPM + bLL);
         break;
        }
       else 
        {
         logwrite(TradeComment,"-----ERROR----- CLOSE BUY "+myInfo+ bER +" Bid="+Bid+ bTK + bSL + bTP + bPM + bLL);
         RefreshRates();
         Sleep(500);
        }


      loopcount++;
      if(loopcount>maxloop)
        {
         logwrite(TradeComment,"-----ERROR-----  Giving up on closing SELL order"); 
         return(gle);
        }
                     
     }//while
  
  }


void CloseSell (string myInfo)
  {
   int gle;
   int cnt;
   int OrdersPerSymbol;

   int loopcount=0;

   string sTK=" Ticket="+OrderTicket();
   string sSL=" SL="+OrderStopLoss();
   string sTP=" TP="+OrderTakeProfit();
   string sPM;
   string sLL;
   string sER;
      
   sPM=" PM="+ProfitMade;
   sLL=" LL="+LossLimit;

   while(true)
     {
      OrderClose(OrderTicket(),OrderLots(),Ask,Slippage,Red);
      gle=GetLastError();
      sER=" error="+gle+" "+ErrorDescription(gle);
      
      if(gle==0)
        {
         logwrite(TradeComment,"CLOSE SELL "+myInfo + sTK + sSL + sTP + sPM + sLL);
         break;
        }
      else 
        {
         logwrite(TradeComment,"-----ERROR----- CLOSE SELL "+myInfo+ sER +" Ask="+Ask+ sTK + sSL + sTP + sPM + sLL);
         RefreshRates();
         Sleep(500);
        }

      loopcount++;
      if(loopcount>maxloop)
        {
         logwrite(TradeComment,"-----ERROR-----  Giving up on closing SELL order"); 
         return(gle);
        }
                 
     }//while                 
  }      


// Function to correct the value of Point
// for brokers that add an extra digit to price
// Courtesy of Robert Hill

double SetPoint()
{
   double mPoint;
  
   if (Digits < 4)
      mPoint = 0.01;
   else
      mPoint = 0.0001;
  
   return(mPoint);
}

Recommend